I. Setting Weighing Mode
To switch weighing modes, when the scale is powering up, tap
down on the front of the scale before it goes to zero, and when
all the LCD segments are showing. You will notice that the
weighing modes will change each time you tap on the scale
II. Operation
1. Place the scale on a level surface and press down on the
front panel near the “ON/OFF” lettering to turn the scale on.
2. Wait 2 seconds for the display to show zero, then gently ap-
ply all item(s) to be weighed onto the weighing platform.
3. The scale will automatically turn off after 2 minutes of no
use, however you may press and hold down on the front of the
scale for 2 seconds to turn it off manually.
III. Tare Weighing.
1. Turn on scale as described above.
2. Place the container or tare item onto the platform.
3. Tap down once on the front of the scale and wait until [ 0 ] is
displayed.
4. Add the “net-weight-item”.
Note: When all weight is removed from the scale, the tared
value of a container will be displayed as a negative value.
Press the tare button again to return scale to zero.
IV. Batteries
This scale comes with two long-life Lithium CR2032 batteries.
Replace batteries if scale is working improperly. To install:
TARE
ZERO
kg
TARE
ZERO
lb oz
TARE
ZERO
oz
TARE
ZERO
g
