MPR-5005
Page 9
Doc# 041326
3.2 INSTALLATION
3.2.1 Site location
The professional installer should select a suitable indoor location for set-up
of the reader, antennas, and PC. An AC mains socket should be available
to plug in the readers 12V supply.
Antennas should not be mounted on metal, or mounted within close
proximity of devices generating large amounts of electro-magnetic
interference i.e. electric motors.
3.2.2 Reader Location
Position reader, RF cables, power cables, and communication cables, so
all can easily reached the proper connections on the reader. The reader
should be mounted on a flat surface, horizontal or vertical, by placing bolts
or screws through predrilled holes near the corners of the reader.
3.2.3 Antenna Connections
The MPR-5005 reader can be connected with one of two antenna
configurations: Single antenna (MPR-5007) or dual antenna (MPR-5011A
+ MPR-5011B). Both have BNC RF connectors.
MPR-5007 Single Antenna: Plug RF connector from antenna into the RF
connector on the reader.
MPR-5011A/B Dual Antenna: Connect the two antennas together via one
6-foot RF cable. Labels on each antenna direct connection route.
Connect the antenna pair to the reader by using the additional 6-foot RF
cable, once again, following labels on antennas.
AWID PROPRIETARY
