Jet Cleaner TANKO-MX
20/102
Operating/Installation Instructions 2019/08
3 Construction and Function
3.3
Technical Data
The estimated safe service life of the device is 10 years with single-shift operation and the use of
drinking water.
The prerequisites for this are that the device must be maintained properly at the intervals specified in
Section 7.4 Maintenance
, and the wear parts must be replaced regularly.
All media other than tap water can reduce the service life of the device.
Designation
TANKO-MX125-G14
TANKO-MX150-G14
TANKO-MX150-G12
Cleaning process
Range
–
Cleaning radius
–
Wetting radius
4 m (13.12 ft)
5 m (16.40 ft)
7.5 m (24.60 ft)
10.5 m (34.44 ft)
8 m (26.24 ft)
9.5 m (31.16 ft)
Volume flow rate / flow
See diagram
Picture 3.3-1
See diagram
Picture 3.3-3
See diagram
Picture 3.3-2
Operating pressure
–
Cleaning medium
3 – 8 bar (43.5 – 116 psig)
Pressure in the container
0 to 0.5 bar (0 to 7.25 psig)
Operating temperature
–
Cleaning medium
+ 5 °C (+41 °F) to + 95 °C (+203 °F)
Ambient temperature
–
Inside the container
+ 5 °C (+41 °F) to + 95 °C (+203 °F)
Cleaning time
See
Section 3.2.1
See
Section 3.2.1
See
Section 3.2.1
Rest state
Pressure in the container
0 to 0.5 bar (0 to 7.25 psig) see
Section 2.1
Ambient temperature
–
Inside the container
+ 5 °C (+41 °F) to + 140 °C (+284 °F)
Installation Dimensions
Process connection [PA]
not specified (provided by the operating company)
Media connection [MA]
1" BSP or NPT
Inner thread
1 ½" BSP or NPT
Inner thread
1 ½" BSP or NPT
Inner thread
Installation opening
–
Stationary device
–
Mobile device
see
Section 5.2.1
Ø 125 mm / Ø 5 in
> Ø 160 mm / Ø 6 ¼ in
see
Section 5.2.1
Ø 220 mm / Ø 8 ½ in
> Ø 235 mm / Ø 9 ¼ in
see
Section 5.2.1
Ø 150 mm / Ø 6 in
> Ø 310 mm / Ø 12 ¼ in
Number of nozzles
–
optional
4 (1x4)
---
4 (1x4)
---
2 (1x2)
---
Nozzle bore
Ø 5.0 / 6.0 mm
Ø 7.0 / 8.0 mm
Ø 7.0 / 8.0 mm
Orbital nozzle movement
Ball Ø
150 mm / 6 in
Ball Ø
225 mm / 8 ⅞ in
Ball Ø
300 mm / 11 ⅞ in
Jet movement
360° orbital
360° orbital
360° orbital
Actuator
Actuator type
–
hydraulic
Hydraulic gear drive
Translation
–
Actuator: Cleaning head
≈ 274 : 1
≈ 274 : 1
≈ 274 : 1
Speed of cleaning head
≈ 5 – 14 rpm
≈ 5 – 14 rpm
≈ 5 – 14 rpm
