47
WARNING
WARNING
WARNING
Always use supplied hook strap whenever spooling winch rope in or
out, during installation or operation to avoid injury to hands and
fingers.
Always wear heavy gloves when handling winch rope.
Step 1: PUT ON GLOVES AND ATTACH HOOK STRAP.
(1) Put on gloves.
(2) Attach the supplied hook strap on the rope hook.
Note: Ensure the hook strap is at-
tached to the hook on the winch rope, not the swiveling anchor hook.
Step 2: CONNECT TO POWER SOURCE.
Note: If you are using a cordless drill, be sure your battery pack is fully charged
before use. Follow your drill/driver manufacturer’s recommendation.
(1) Using the chuck of your drill/driver, connect to the driver shaft on your winch.
(2) Secure the chuck of your drill around the driver shaft tightly to avoid the drill slipping off
the shaft.
Always tighten drill to winch driver shaft. Drill can come loose and
cause injury.
(3) If using a corded drill/driver, verify that power cords and extension cords are positioned
so that the winch rope or moving load will not damage the cords or that cords can not
be stepped on, tripped over or otherwise subjected to damage or stress.
Lock/tighten
Unlock/release
