Award VTC820, Руководство пользователя

Страница: 12 / 35

INSTALLATIONS
8 VTC820 User’s Manual
Installing the Memory
The VTC820 CPU Card supports two DDR memory sockets for a maximum
total memory of 2GB in DDR memory type. The memory module capacities
supported are 64MB, 128MB, 256MB, 512MB and 1GB. The following
table lists the supported SDR DIMM configurations. Intel 845G supports
configurations defined in the JEDEC DDR DIMM specification only
(A,B,C). Non-JEDEC standard DIMMs such as double-sided x16 DDR
SDRAM DIMMs are not supported.
Supported DDRM DIMM Configurations.
Density 64 Mbit 128Mbit 256Mbit 512Mbit
Device
Width X8 X16 X8 X16 X8 X16 X8 X16
Single/
Double SS/DS SS/DS SS/DS SS/DS SS/DS SS/DS SS/DS SS/DS
184-pin
DDR 64/128MB 32MB/NA 128/256MB 64MB/NA 256/512MB 128MB/NA 512/1024M 256MB/NA
Installing and Removing Memory Modules
To install the DDR modules, locate the memory slot on the CPU card and
perform the following steps:
1. Hold the DDR module so that the key of the DDR module align with
those on the memory slot.
2. Gently push the DDR module in an upright position until the clips of the
slot close to hold the DDR module in place when the DDR module
touches the bottom of the slot.
3. To remove the DDR module, press the clips with both hands.
DDR Module
Lock
Lock
Lock Lock