Award PPS6031, Инструкция по эксплуатации

Страница: 4 / 12

3
(3) INSTALLATION

When the range hood is located above a gas
appliance, this distance shall be at least 65 cm
between the supporting surface for the cooking
vessels on the hob and the lowest part of the
range hood.

Make a cut-out in the joinery as follows: wide 490*265(mm) for
52CM and 665*265(mm) for model 70CM. Pic 1. Make sure you
have at least 35mm clearance from the edge of the cut-out to the
joinery.

Remove the filter and remove the screws holding the panel

Use the fixing screw supplied to attach range hood to joinery

Reinstate panel to body and fit filter

Connect ducting to hood outlet

The air must not be discharged into a flue that is used for
exhausting fumes from appliances burning gas or other fuels;

Regulations concerning the discharge of air have to be fulfilled.

The range hoods are intended to be installed over a hob having not
more than 4 hob elements.
The size of cavity :