Award PPS602, Руководство пользователя

Страница: 5 / 20

WARNINGS








the equipment and the warranty will be cancelled accordingly). The use
of the equipment on a fuel stove is not authorized (wood, coal,…).
Frying under the equipment shall be constantly monitored since oils and
fats being subjected to high temperatures may ignite. Do not flame under
the hood.
CAUTION: accessible parts may become hot when used with cooking
appliances.
Follow the cleaning frequency and filter substitution. The accrual of fat
deposits may provoke fires. Never use the hood without the anti-fat filter.
The equipment shall be installed in accordances with the existing rules on
the ventilation of closed spaces. Technically, the air expelled shall not
pass through the duct used for the discharge of smokes from appliances
using gas or any other fuel (central heating systems, etc...).
Ventilate the environment appropriately in case of a simultaneous
operation of the hood and any other equipment supplied by an energy
source other than electricity so that the hood will not draw gas
compounds.
Attention! There shall be adequate ventilation of the room when the hood
is used at the same time as appliances burning gas or other fuels (not
applicable to appliances that only discharge the air back into the room).
It is necessary to maintain a depressurized environment of maximum 4
Pa (0.04 mbar). Such conditions allow an excellent working of the hood.
In order to achieve such environment a permanent air intake is
necessary in order to avoid air stagnation (it is advised to use a
ventilation grid for this purpose). Windows or doors shall not be used.
The electrical supply of the power network shall be stable and cope with
the indicated electrical standards, see rating label. Should it be not stable
and receive voltage variations in the supply, intensity or frequency such
as armonici, transistor, voltage dips, overloads, electrical storms, etc...,
the hood may show malfunctions or even breakdowns, and the repair
would not be covered by the warranty. In that case, the hood shall
be disconnected and the
supply company contacted to solve the supply
problem.