![Award PCM-9361 Скачать руководство пользователя страница 20](http://html.mh-extra.com/html/award/pcm-9361/pcm-9361_user-manual_3035227020.webp)
PCM-9361 User Manual
14
2.2.2.11
COM Port Connector (CN17, CN22)
The PCM-9361 provides 2 serial ports (COM1 and COM2).
One 7*2P PIN HEADER (CN17) for COM2 output; and one DB-9 connector for
COM1(CN22)
COM RS-232/422/485 setting (J6)
COM2 can be configured to operate in RS-232, RS-422, or RS-485 mode.
This is done via J6.
It provides connections for serial devices (ex: a mouse, etc.) or a communication net-
work. You can find the pin assignments for the COM port connector in Appendix A.
2.2.2.12
Ethernet configuration(CN18)
10/100/1000 Mbps connections are made via RJ-45 connectors.
The board is equipped with 1 high performance PCI Ethernet interface which is fully
compliant with IEEE 802.3u 100Base-T & IEEE 802.3ab 1000Base-T. It is supported
by all major network operating systems.
2.2.2.13
Fan Power Supply Connector (CN19)
Pr5 V power supply to CPU cooling fan.
2.2.2.14
Keyboard and PS/2 mouse connector (CN21)
The board provides a keyboard connector that supports both a keyboard and a PS/2
style mouse. In most cases, especially in embedded applications, a keyboard is not
used. If the keyboard is not present, the standard PC/AT BIOS will report an error or
fail during power-on self-test (POST) after a reset. The product's BIOS standard
setup menu allows you to select "All, But Keyboard" under the "Halt On" selection.
This allows no-keyboard operation in embedded system applications, without the
system halting under POST.
2.2.2.15
CRT display connector (CN23)
The CRT display connector is a DB15 connector used for conventional CRT displays.
2.2.2.16
CompactFlash (CN24)
The CompactFlash card shares a Primary IDE channel which can be enabled/dis-
abled via the BIOS settings.
2.2.2.17
DDRII DIMM Socket (CN25)
One 200-pin/H6.5 mm DDRII DIMM socket (CN25) supports DDRII 400/533 MHz up
to 2 GB.
2.2.2.18
Power Reset button (CN26)
Momentarily pressing the reset button will activate a reset. The switch should be
rated for 10 mA, 5 V.
J6 COM2
Setting
Setting
Function
(1-2)
RS232
(3-4)
RS485
(5-6)
RS422
Содержание PCM-9361
