Award H902B, Инструкция по использованию

Страница: 9 / 20

9
Residual heat indication
After the switch off of a heating zone or the complete stop of the hob, the heating zones are still
hot and indicates [ H ] on the display.
The symbol [ H ] disappears when the heating zones may be touched without danger.
As far as the residual heat indicators are on light, don’t touch the heating zones and don’t put any
heat sensitive object on them.
There are risks of burn and fire.
Booster function
Power [ P ] and Super Power [ ] grant a boost of Power to the selected heating zone.
If this function is activated the heating zones work during 10 minutes with an ultra-high Power.
This is foreseen for example to heat up rapidly big quantities of water, like noodles

Start-up / Stop the Booster:
Action Control panel Display
Start up the Booster
Slide to the end of the “SLIDER”
[ P ]
Or press directly on the end of
the “SLIDER”
Stop the Booster
Slide on the “SLIDER“
[ 9 ] to [ 0 ]

Start-up / Stop Double Booster:
Action Control panel Display
Start up the Booster
Slide to the end of the “SLIDER”
[ P ]
Or press directly on the end of
the “SLIDER”
Start-up Double Booster Re-press key [ P ] [ and P ]
Stop the Double Booster
Slide on the “SLIDER“
[ P ] to [ 0 ]
Stop Booster
Slide on the “SLIDER“
[ 9 ] to [ 0 ]

Power management:
The hole cooking hob is equipped with a maximum of Power. When the Power function is
activated, and in order to exceed the maximum Booster, the electronic system orders to reduce
automatically the power level of another heating zone. The display is blinking on [ 9 ] during a few
seconds and then shows the maximum of power allowed :
Heating zone selected The other heating zone: (example: Booster level 9)
[ P ] is displayed [ 9 ] goes to [ 6 ] or [ 8 ] depending the type of zone
Timer
The timer is able to be used simultaneous with all heating zones and this with different time
settings (from 0 to 99 minutes) for each heating zone.

Setting and modification of the cooking time:
Action Control panel Display
Select the power level
slide on the “SLIDER“
[ 1 ] to [ P ]
Select theTimer Press simultaneously key [ - ] and [ + ] Timer display on
from the timer until the
desired display is on
Decrease the time Press key [ - ] from the timer [ 60 ] to 59, 58...
Increase the time Press key [ + ] from the timer Time increase
After a few seconds, the [ min ] display stops with blinking.
The time is confirmed and the timer starts.