Award E-295, Руководство по установке

Страница: 5 / 16

3.– MAKING THE OPENING
I
If the ceiling hood is going to be fitted between the joists, the air exhaust duct position can be placed on the
short side, only, and the opening dimensions will be as detailed in
A OPTION , only.
If the ceiling hood is going to be installed with threaded rods, it will can be installed according to
the opening
dimensions detailed in option A or the opening dimensions detailed in B OPTION , as seen in page 2.
REMARK: 300mm x 300mm is the opening reserved to make easy the attach of the air exhaust duct to
the hood air outlet . It will be closed when this task is finished.
E-295 CEILING HOOD INSTALLATION GUIDE
Page 4
4.– HOLDING IN THE CEILING
There are two ways to hold the ceiling hood:
A SYSTEM - Using threaded rods ( M8 size) to adjust the length between the rough ceiling and the suspended
ceiling.
B SYSTEM - Fitting between the joists.
REMARK!
The M8 size threaded rods are not supplied with the provided accesories.
Please read carefully the following instructions to adjust the threaded rods with the correct length.
The hood can be damaged if these instructions are not followed to the letter.
A SYSTEM - Using threaded rods ( M8 size).
EXTERNAL MOTOR VERSION
INTERNAL MOTOR VERSION