3
2
5
4
7
1
6
7
1.
Pre-drilled holes
2.
Wall plug
3.
Wall behind the cabinet
4.
Spacer
5.
Drying cabinet back wall
6.
Washer
7.
Attachment screw
8.
Spirit level
9.
Cover plug (4)
PLACEMENT
_________________________________________
The drying cabinet is only intended for use indoors
in a dry area.
_________________________________________
Do not place the drying cabinet in an area where
high-pressure water is used for cleaning.
______________________________________
LEVELLING
The drying cabinet must be installed upright on a flat
surface and be supported by all four feet. It can be
levelled using the adjustable feet.
Use the supplied Allen key to adjust the feet from
inside the cabinet.
Press the four covering plugs firmly into the holes.
SECURING TO WALL
The cabinet must be secured to the wall to prevent it
from tipping over.
1
Place the cabinet in the desired location, open the
door and slide out the upper set of hangers.
2
Drill two 8 mm holes in the wall through the pre-
drilled holes
(1)
in the rear of the cabinet.
3
Insert the wall plugs
(2)
into the wall. Slide a spa-
cer
(4)
on to each screw
(7)
and fit them with the
washers as shown. The screws are found in the
installation kit.
_________________________________________
WARNING!
The drying cabinet must not be used
unless it has been secured to the wall,
as it could tip forwards otherwise.
_________________________________________
8
9
(4)
