Awanti Elite BCSE50R3S, Инструкция по эксплуатации

Страница: 12 / 48

12
OPERATING YOUR APPLIANCE
MODEL: WCSE47R3S
It is recommended you install the appliance in a place where the ambient temperature is between
19ºC-24ºC (66ºF-75ºF). If the ambient temperature is above or below recommended temperatures,
the performance of the unit may be affected. For example, placing your unit in extreme cold or hot
conditions may cause interior temperatures to fluctuate. The range of 5
ºC-18ºC (
40ºF-65ºF) may
not be reached.
Unit Temperature Range:
40º F – 65º F 5º C - 18º C
Recommended temperature settings
Wine conservation:
Rose and Sparkling Wines:
Dry / White Wines:
Red Wines:
50° F - 57º F
40° F - 46º F
48° F - 54º F
57° F - 65º F 10° C - 14º C
5° C - 8º C
9° C - 12º C
14° C - 18º C
ON/OFF Power
To turn OFF the appliance, press the
button and hold 2 seconds.
Setting the temperature control
You can select temperature display setting from Fahrenheit to Celsius degree by touching the
button. Fahrenheit or Celsius degrees indicator will appear in blue color in the temperature display
window.
If you desire to change the temperature, set the temperature as you desire by touching the
or
button. First press the button. The numbers in the display window will flash. The temperature
that you desire to set will increase 1ºF or 1ºC if you touch the button once; on the contrary the
temperature will decrease 1ºF or 1ºC if you touch the button once.
When you store mostly red wines, the temperature which you control by touching the above two
buttons need to be set at 15ºC-18ºC (59ºC-65ºF).
When you store mostly white wines, the temperature needs to be set at 10ºC-14ºC (50ºF-57ºF)
When you store mostly sparkling wines, the temperature needs to be set at 5ºC-8ºC (40ºF-46ºF)
The temperature inside the unit will be appeared in blue color in the display window.
NOTE: If the unit is unplugged, if the power is lost, or turned off, you must wait 3 to 5 minutes
before restarting the unit. If you attempt to restart before this time delay, the appliance will not start.
When you use the appliance for the first time or restart the appliance after having been shut off for
a long time, there could be a few degrees variance between the temperature you select and the
one indicated on the LED readout. This is normal and it is due to the length of the activation time.
Once the appliance is running for a few hours everything will be back to normal.