25
2 Safety information
2.2 Specific Safety Precautions
2.2.1 Board & Driveline Safety
•
Never place body parts or objects in
close vicinity to the driveline while the
BP is connected to the board. Never
attempt to service the product in the
water; only in a dry environment.
•
Never connect or remove the BP when
the board is in the water or when
there is water within 10 feet or there
is water or moist on the board power-
connector or BP connector.
•
Avoid any and all debris in the water
when in operation such as seaweed
or rocks. Objects are likely to be
sucked into the jet and may cause
damage to the system or be ejected
at high speed from the rear of the
jet, potentially causing damage to
property or injuries.
•
Never remove the front cover when
the BP is connected to the board. The
cover protects high voltage electrical
components, which if damaged or
tampered with may present a risk of
electric shock and fire.
•
Never attempt to dislodge debris from
the jet when the PKL is attached to
the BP.
