8
G. Setup
1. Press
SETUP
on the remote control.
2. Press direction buttons to select the item you want.
3. Press
ENTER
to confirm your selection.
4. Press
SETUP
again to exit the setup.
1. General Setup
a)
SPDIF Output
* SPDIF Off: The digital signal audio output will be off.
* SPDIF/RAW: The audio output will be not modulated.
* SPDIF/PCM: The audio output will be modulated in Pulse Code Modu-
lation mode.
b)
TV Display
* Normal/PS: When the player outputs signal to a normal TV, a nor
mal picture is shown on the full screen.
* Normal/LB: When the player outputs signal to a normal TV, a nor
mal picture is shown on the screen with a black strip at
both the top and bottom of the screen.
* Wide: When the player outputs signal to a wide screen TV, a
wide picture is shown on the full screen.
c)
Angle Mark
* On: The screen will show the Angle mark icon. (*If an angle option is
available).
* Off: The screen will not display the Angle Mark
d)
Screen Saver
*On: Enables screen saver
Note: The DVD player will enter the Screen Saver mode after
approximately five minutes if the same image remains on the
screen.
*Off: Disables screen saver
PDF created with FinePrint pdfFactory Pro trial version
http://www.fineprint.com
