AWA STB 232, Руководство пользователя

Страница: 3 / 34

SAFETY INFORMATIONS
This STB has been manufactured to satisfy international safety standards.
Please read the following recommended safety precautions carefully.
MAINS SUPPLY
:
OVERLOADING
:
LIQUIDS
:
CLEANING:
VENTILATION:
ATTACHMENTS:
CONNECTION TO
THE CABLE TV
SIGNAL AND TV:
SERVICING
:
LIGHTNING
:
GROUNDING
:
AC220-240V ~ 50/60Hz
Do not overload wall outlets, extension cords or adapters
as this can result in fire or electrical shock.
NOTE
Before cleaning, disconnect the STB from the wall socket.
Use a cloth lightly dampened with water(no solvents) to
clean the exterior.
Do not block the STB ventilation holes. Ensure that free airflow
is maintained around the STB. Never store the STB where it is
exposed to direct sunlight or near heating euipment e.g. a
radiator.
Never stack other electronic equipment on top of the STB.
Place the STB at least 30mm from the wall.
Keep liquids away from the STB.
Do not use any attachment that is not recommended by the
manufacturer; it may cause a hazard or damage the equipment.
Connect all components before plugging any power cords into the wall
outlet. Always turn off the STB, TV and other components before you
connect or disconnect any cables.
Do not attempt to service this product yourself.
Any attempt to do so will make the warranty invalid.
Refer all servicing to a qualified service agent.
If the STB is installed in an area subject to intense lightning
activity, protection devices for the STB mains connector and
modem telephone line are essential.
The individual manufacturer's instruction for safeguarding other
equipment, such as TV set, Hi-Fi, etc., connected to the STB must
also be followed during lightning storms.
CATV cable MUST BE EARTHED.
The grounding system must comply with SABS 061.
Dispose the used batteries at designated place for environment protection