OPERATION
FF
Prev.
Next
FB
Pause
00:00:33/00:04:22
Play
Stop
Record a paused DTV program to USB storage device
PAUSE
STOP
NOTE:
1. While in the DTV input source, insert USB storage device to the USB port on the side of your TV.
2. Select a DTV channel, then press
to start the Time Shift function. The TV program will be
paused on screen; the Time Shift OSD appears and recording commences. Press play to playback the
time-paused material.
3. Press
to stop the Time Shift function and stop recording program.
Please do not unplug the USB storage device when the Time Shift function is activated, as damage to the
recorded file or the USB storage device may occur.
Approximately 4GB of memory buffers about 30-40 minutes of DTV material.
-20-
10. Timeshift function
Prepare to record the program
NOTE:
USB Drive Storage Format
NOTE:
This TV allows you to pause and record the currently watched digital TV program to a USB storage device,
and to resume viewing at the point where it was paused.
Formatting a USB 2.0 storage device will be needed. Save the original data on your USB device before
formatting. All the data stored in the USB device will be erased after formatting.
Follow the Format instructions on
of this Manual to format the USB device and allocate the
amount of space for the Time Shift function.
The format process will take at least 2 minutes depending on the capacity of your USB device. Please do
not turn off the power or remove the USB device during formatting. The High Speed format option is
recommended for better HDTV recording results.
During formatting, a speed test will be done on the USB device. If it fails, it means the USB device may
not support the Time Shift function.
page 15
