AVZ Picca, Инструкция по установке

Страница: 3 / 7

Picca EN 20-03-2017
page 3
General info folding arm awning Picca
®
Dimensions
In extended
position: 150 cm 200 cm 250 cm 250 cm* 300 cm 300 cm*
Maximum width 550 cm 550 cm 550 cm 550 cm 500 cm 500 cm
Minimum width 183 cm 240 cm 298 cm 280 cm 355 cm 324 cm
** = Arms with equal parts.
Use these arms only if necessary to realise the smallest width possible. Use of these arms
for greater widths will lead to incorrect distribution of the forces over the front profile, which
could cause it to flex. Moreover, the front section of the folding arm will sag and cause the
front profile to drop.
Inclination angle
The Picca
®
can be placed at an angle of ± 5° to ± 35°.
Fabric winding method
The fabric of the Picca
®
folding arm awning is wound bottomwise.
Cut sizes
Outer width size minus stated measures (mm). Unless stated otherwise.
When operated by: Gear box Motor ASA Motor Somfy
Top cover 14 mm 14 mm 14 mm
Front profile 72 mm 30 mm 30 mm
Roller 78 69.5 mm 68.5mm 54 mm
Fabric 125 mm 110 mm 110 mm
Motor diagram
Width: Extension
150 cm
Extension
200 cm
Extension
250 cm
Extension
300 cm
from 200 to 240 cm 25 Nm
from 241 to 300 cm 25 Nm 30 Nm
from 301 to 360 cm 25 Nm 30 Nm 40 Nm
from 361 to 440 cm 25 Nm 30 Nm 40 Nm 40 Nm
from 441 to 500 cm 25 Nm 30 Nm 40 Nm 40 Nm
from 501 to 550 cm 30 Nm 35 Nm 40 Nm
CE classification
Class Specifications
Lifespan 1 10.000x open and closed
Water load: 1 56 l/m² per hour
Wind load: 1 Beaufort scale 4 = wind speed 28 km/h