AVYCON AVK P2500, Быстрый старт, Страница: 14 / 26

[ MAIN SETUP ]
8. SLEEP : OFF
] MAIN SETUP [
9. BUZZER : ON
] MAIN SETUP [
10. TERMINATE: ON
] [ MAIN SETUP
11. JOYSTICK SPD
] [ MAIN SETUP
12. MOUSE SPD : HIG
] MAIN SETUP [
13.PASSWORD: ****
] MAIN SETUP [
14. FACTORY SET
[ MAIN SETUP ]
15. SAVE/EXIT
<NO> YES
[ FACTORY SET ]
[ SAVE / EXIT ]
<NO> YES
: OFF/ 1Min/ 5MIn /10Min / 30Min /1 (Hour)
Setting to save power in the standby mode
: OFF / ON Select BUZZER ON/ OFF
: OFF / ON Select TERMINATION ON/ OFF
Select joystick speed from 50MS~300MS
: HIG / MID / LOW Mouse speed setting when operated with DVR
Password change (Factory set: 0000)
Factory set.
All data will be changed to the factory set.
(Move to YES and press )
ALL DATA
INITIALIZED JOYSTICK
CALIBRATION
Select save the data or not for the changed setting value
ENT
After factory set, the Tx LED on the LCD screen
flashing is not a malfunction.
After factory set, the joystick must reset the
settings in the Joystick Calibration mode.
AVK-P2500 Quick Start Guide
1 13