AVX ethertronics ETH-LORA-M-AX-01 Скачать руководство пользователя страница 3

Страница: 3 / 27

Referance Manual

ETH-LORA-M-AX-01

020620

OVERVIEW

This document describes user manual for the developers to design a final product containing the module ETH-LORA-M-AX-01 (V1.2) acting as a LoRa

module.

PRODUCT BRIEF

Ethertronics’ LoRa Module ETH-LORA-M-AX-01 is an SMT mounted low cost and low power radio module that operates in the unlicensed 868/915 MHz

band. It integrates STM32L151 as the main MCU and Semtech SX1272 as the LoRa IC. ETH-LORA-M-AX-xx is principally built with complete firmware

to simplify its integration in the final product. Interfacing with this module is easy with two lines UART via AT commands.

ETH-LORA-M-AX-01 is designed with a power saving technique so that the current consumption is low even when in communication. All these features

make ETH-LORA-M-AX-01 a perfect platform for a long range wireless communication with low throughput data. This module can be used in various

applications such as smart metering, smart grids, smart city, industrial control, etc.

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

This device may not cause harmful interference, and

2. This device must accept any interference received, including interference that may cause undesired operation.

NOTE: The grantee is not responsible for any changes or modifications not expressly approved by the party responsible for compliance. Such modifications could void the user’s

authority to operate the equipment

SCOPE

This document focuses on helping the developers to integrate ETH-LORA-M-AX-01 in the final product to fasten the time to market of their product.

This document is not intended to provide an overall description of all software solutions and all products that may be designed. This document

explains several AT commands in order to perform specific tasks. For a complete guide of AT commands supported by ETH-LORA-M-AX-01, please

refer AT Command Reference Guide available on AVX’s website. Developers are also highly advised to refer to all the necessary application notes

available on AVX’s website.

Link:

http://www.avx.com/products/modules/lora-module/

DOCUMENT ORGANIZATION

This document contains the following sections:

Section Overview provides a product brief, scope for this manual and its organization.

Section Getting Started describes briefly LoRa communication and the deployment architecture of ETH-LORA-M-AX-01.

Section Basic Operation explains the basic operation to send a message over LoRa Network using this module.

Section Advanced Operation provides in-depth information on more advanced operation and AT commands of the module.

Section Appendix contains lists of the abbreviation, figures and table of this document and also the useful reference link.

Содержание ethertronics ETH-LORA-M-AX-01




























Результаты поиска

Содержание ethertronics ETH-LORA-M-AX-01

Отзывы:

Похожие инструкции для ethertronics ETH-LORA-M-AX-01

Бренды по названию

Популярные бренды

AVX ethertronics ETH-LORA-M-AX-01, Справочное руководство

Результаты поиска

Содержание ethertronics ETH-LORA-M-AX-01

Отзывы:

Похожие инструкции для ethertronics ETH-LORA-M-AX-01

Бренды по названию

Популярные бренды