AVX ethertronics ETH-LORA-M-AX-01 Скачать руководство пользователя страница 23

Страница: 23 / 27

Referance Manual

ETH-LORA-M-AX-01

AT Command

Syntax

AT+LORA@MCD%STATUS?

Return Value

<CR><LF>XX, YY

XX: Status value(see status Table)

YY: Internal EC686 (MCD) RF vector value

Example

AT+LORA@MCD%STATUS?

143,1

Example

description

The XX is 143 which means that the internal EC686 (MCD) is in bypass mode

The YY is 2 which means that the RF Vector of the internal EC686 (MCD) is 0x01

Status Value

Description

Decimal

Hex

0x00

MCD is Reset and paused

0x10

MCD is Running

0x1F

MCD is running, Force to a mode

0x20

MCD is paused

0x2F

MCD is paused, Force to a mode

143

0x8F

External EC686 is in Bypass Mode

255

0xFF

Error Occurred

Table 10

SWITCHING FIRMWARE VERSION

ETH-LORA-M-AX comes with a preprogrammed factory firmware. If in future the Ethertronics provide an updated firmware for this module, users can

upload the latest firmware on to module using the software tool available on the Ethertronics’ website. To perform the firmware update,

please refer

to Upgrading Firmware

application note.

Link:

www.avx.com/products/modules/lora-module

After performing the upgrading firmware process, user can always switch back to factory firmware as the new firmware will not overwrite the factory

one.

Here is the command to switch between firmware:

1. Switch to factory firmware:

2. Switch to updated firmware:

After this command is issued, the host needs to wait for ~1.5s before sending next AT command to let ETH-LORA-M-AX-01 jumps to its updated

firmware and initialize its system. If there is no available updated firmware, the module switches automatically to its factory firmware.

AT Command

Syntax

AT+LORA&F0 or AT&F0

Description

To configure ETH-LORA-M-AX-01 to run on the factory firmware

Return Value

<CR><LF>OK<CR><LF>: Operation successful.

AT Command

Syntax

AT+LORA&F1 or AT&F1

Description

To configure ETH-LORA-M-AX to run on the updated firmware if available, otherwise run back on

the factory firmware.

Return Value

<CR><LF>OK<CR><LF>: Operation successful.

Read the RF Vector of the internal EC686 (MCD) after using bypass command:

092419

Содержание ethertronics ETH-LORA-M-AX-01




























Результаты поиска

Содержание ethertronics ETH-LORA-M-AX-01

Отзывы:

Похожие инструкции для ethertronics ETH-LORA-M-AX-01

Бренды по названию

Популярные бренды

AVX ethertronics ETH-LORA-M-AX-01, Справочное руководство

Результаты поиска

Содержание ethertronics ETH-LORA-M-AX-01

Отзывы:

Похожие инструкции для ethertronics ETH-LORA-M-AX-01

Бренды по названию

Популярные бренды