36
exposure in usage against the head with no separation,
and near the body with the separation of 15 mm.
Although the SAR is determined at the highest certified
power level, the actual SAR level of the device while
operating can be well below the maximum value. This
is because the phone is designed to operate at multiple
power levels so as to use only the power required to
reach the network. In general, the closer you are to a
wireless base station antenna, the lower the power
output.
The exposure standard for wireless devices employing a
unit of measurement is known as the Specific
Absorption Rate, or SAR. The SAR limit set by the
FCC is 1.6W/kg, and 1.6W/kg by Industry Canada.
This device is complied with SAR for general population
/uncontrolled exposure limits in ANSI/IEEE C95.1-1992
and Canada RSS 102, and had been tested in
accordance with the measurement methods and
procedures specified in OET Bulletin 65 Supplement C,
and Canada RSS 102. This device has been tested, and
meets the FCC, IC RF exposure guidelines when tested
with the device directly contacted to the body.
The FCC has granted an Equipment Authorization for
this model phone with all reported SAR levels evaluated
as in compliance with the FCC RF exposure
guidelines. SAR information on this model phone is on
file with the FCC and can be found under the Display
Grant section of
www.fcc.gov/oet/ea/fccid
after
searching on FCC ID:
WVBA821X
.
For this device, the highest reported SAR value for
usage against the head is 0.77 W/kg, for usage near
