-24-
you need to use a network barring code, which can be obtained from the network operator. If the code is
wrong, an error message will be prompted on the screen. After selecting a call barring option, continue to
select Activate or Deactivate. The mobile phone will prompt you to input the call barring code and then
contact the network. A moment later, the network will make a response and send the operation results to
the mobile phone.
Line switching
: Switch to Line 1 or Line 2. By default, Line 1 is used.
Note: If you choose Line 2, dialing may fail. This depends on the implementation of the network operator.
Group list:
This function requires network support. For details, consult the local network operator.
Note: SIM on service is required.
Advanced settings
Blacklist:
He or she can’t call you if you set the blacklist status to on and add his or her number to
blacklist.
Auto redial
:
Set it to
On
or
Off
to enable or disable auto redial. If you set
Auto redial
to
On
, the mobile
phone will automatically redial the number a moment later if the called party does not reply. In the auto
redial period, you cannot dial other numbers. To end the auto redial process, press the
End
key.
Note: This function requires support from the network operator to which the SIM card is registered.
Call time display
: To display call time during a call.
Call time reminder
: To set single or periodic tone in a call to make you know the time.
Auto quick end
: This function enables you to end a call at a preset time.
Reject by SMS
: Reject an incoming call and reply the caller a short message to state that you are not
available at this moment.
Connect notice
: Once this function is enabled, the phone would remind you when a call is connected.
