BEF
ORE
GETTING
S
TAR
TED
•
P
A
GE
9
OPERATING INSTRUCTIONS
First Time Set Up
1. Unpack the Pulse and power supply.
2. Insert the power supply cord into the power port in the rear of the Pulse.
3. Connect the power supply to a standard outlet (110v) to use.
Powering Pulse
The Pulse can be powered by plugging the unit into an electrical outlet (110V,
AC) or using the lithium-ion rechargeable battery (sold separately). The Pulse
can also be used while the battery pack is charging and the unit is plugged
into an electrical outlet.
An optional lithium-ion rechargeable battery pack is sold separately. A fully
charged battery pack will power the Pulse for approximately seven (7) hours
of run time.
The four (4) battery level indicator lights show what percentage of charge
remaining in the battery.
Charging Times
• 4 lights - 100% charge or ~ 7 hours
• 3 lights – 75% charge or ~ 5 hours
• 2 lights – 50% charge or ~ 3.5 hours
• 1 light – 25% charge or ~ 1.5 hour
NOTE: Battery packs are sold separately and are available for purchase at
.
Turning the Pulse On and Off
To turn on the Pulse, press and hold the power button for three (3) seconds.
The MODE, power and battery level indicator will all light up.
To turn off the Pulse manually, press and hold the power button for three (3)
seconds. The MODE and power button will light up, and the low battery level
light will blink as the unit goes through the power down cycle. The Pulse will
turn off automatically after completing a full run cycle.
