2
PACKAGE CONTENT
IR camera
User Manual
Bracket
INSTALLATION
1. Use the supplied three screws to attach the bracket to wall. Drill a hole in advance on the
proper position of the wall for the Power and Video Cable to pass through later.
2. Remove the Joint Lock from the bracket by turning it counterclockwise. Then, screw the
Joint Lock to the backside of the camera (turn clockwise)*.
NOTE:
There are two screw holes on the backside of the camera. Please choose
the proper one which best suits your installation environment.
3. Screw the camera with the Joint Lock connected to the bracket. After that, secure the Joint
Lock to fix. Then, pass the Power and Video Cable through the hole drilled in Step 1 to hide
it.
Figure 1
Figure 2
Figure 3
CONNECTION
1. DC12V Input Terminal
Connect the power terminal of the camera to a DC 12V regulated power supply.
NOTE:
Please use the correct power adaptor, DC12V (regulated), to operate this unit.
The power tolerance of this unit is DC12V ± 10%. Over maximum DC 12V
power input will damage this unit.
2. Video Output Connector (VIDEO OUT)
Connect the camera video output and the monitor video input with 75
Ω
coaxial cable.
alarm shop
