Room Alert User’s Guide
49
ManageR software, Device Discovery utility or log in to your GoToMyDevices account.
If your Room Alert is not accessible on the network, to reset it to factory defaults:
1.
With your Room Alert connected to the network and powered on, press and hold the
reset button for at least 10 seconds until the left LED over the network jack turns off and
then on again.
2.
Your Room Alert will automatically reboot and attempt to obtain an IP address via DHCP.
3.
To automatically discover your Room Alert on your network, open AVTECH’s Device
ManageR software, Device Discovery utility or log in to your GoToMyDevices account.
TIP
IMPORTANT: When you reset to factory defaults, you lose all of your previously
configured settings, including password security.