* The CS-C conversion ring is not supplied in the sales package and needs to be purchased separately.
MAJOR OPERATING CONTROL AND FUNCTIONS
VIDEO
AUDIO
AUTO IRIS
V.D.
D.D.
AES
BLC
AGC
OFF
AI
MAX
OFF
FL 1/100
LEVEL
L
H
PL
1
2
3
4
12V DC
DC12V
1. Flange Back Adjusting Ring
It is suitable for CS-mount lens. When using C-mount lens, please use the
CS-C conversion ring*
.
2. Back Focal Lock Hexagonal Bolt
The camera is set at the standard back focal position. Fine-tuning is inevitable according to the lens types.
Adjust the lens back-focus by turning the focusing knob.
3. Auto Iris Lens Connector
Supplies power and controls signals to an Auto Iris Lens.
4. DC Drive Level adjustment V.R.
When using Direct Drive Lens, you can adjust the DC Drive Level for the bright of video output.
5. Power LED Indicator
The Power LED Indicator indicates normal status during operation.
6. Power
Input
Terminal
!
For connecting to DC12V regulated power supply.
For connecting to the regulated AC230V power supply.
For connecting to the regulated AC24V / DC12V power supply.
7. Video Output Connector (VIDEO OUT)
For connecting to CCTV monitor video input with coaxial cable.
8. Function
Select
AES (Automatic Electronic Shutter) / AI (Auto Iris Lens) selectable:
AES – When using a manual iris lens or fixed iris lens, set this switch to AES.
AI – When using an auto iris lens, set this switch to AI.
BLC / OFF: Back light compensation function selection.
AGC / MAX: AGC Normal / AGC Max selectable
Flickless Mode: ON/OFF
OFF/FL 1/100 (NTSC)
FL 1/100 is Flicker less 1/100 (means shutter fixed at 1/100 second)
OFF/FL 1/120 (PAL)
FL 1/120 is Flicker less 1/120 (means shutter fixed at 1/120 second)
9. V.D. / D.D. selectable
When using Auto Iris Lens, select Video Drive or Direct Drive depend on the type of lens you used.
10. Audio Output Connector (AUDIO OUT)
Connect to the AUDIO IN connector of the recording device.
