Step 5: Slightly adjust the camera lens to where it’s supposed to face, and replace Part 1 and Part 2 back,
as shown in
Figure 4
and
Figure 5.
Note:
Do not install the lens opposite down. (Refer to
Figure 6).
Figure 4
Figure 5
Step6:
Hold the camera lens and Part 1, and rotate only Part 2 clockwise until it’s fastened, as shown in
Figure 5
.
NOTE:
Do not install the lens upside down. (Refer to
Figure6
)
Upside
Downside
Figure 6
Step7: Power on the camera and fine-tune the viewing angle.
For Model 2, please refer to the section, "
FOCAL LENGTH & FOCUS ADJUSTMENT
".
