INSTALLATION
Step1: Find the wrench supplied in the sales package, and loosen the screw as indicated below to loosen
the joint lock of the bracket.
Note:
for lock, and for
unlock.
Step2: Locate where to install this camera, and fasten the bracket to the ceiling or wall.
Then, adjust the viewing angle of the camera, and fasten the screw to secure the joint lock of the
bracket.
Note:
for lock, and for
unlock.
CONNECTION
1. DC12V Input Terminal
Connect the power terminal of the camera to a DC 12V regulated power supply.
Note:
Please use the correct power adaptor, DC12V (regulated), to operate this unit. The power
tolerance of this unit is DC12V ± 10%. Over maximum DC 12V power input will damage this
unit.
2. Video Output Connector (VIDEO OUT)
Connect the camera video output to the video input of a DVR with 75
Ω
coaxial cable.
Note:
To ensure the camera has sufficient protection against moisture, an extra waterproof
measure, such as by using an insulating tape, must be used to cover the power and video
connectors after connection.
