INSTALLATION
Step1: Find the screw on the camera, and remove it with the supplied wrench.
Then, remove the camera base as shown in
Figure 1
, and disassemble the camera to four parts as shown in
Figure 2
.
Figure 1 Figure
2
Step2: Locate where you want to install this camera (wall or ceiling), and drill holes on the wall or ceiling for securing the
bracket and routing the cables (if necessary).
Step3: Attach the bracket to the wall (or ceiling), and make sure the cables are routed and arranged properly in the bracket,
as shown in
Figure 3
.
Step4: Secure the bracket to the wall (or ceiling), as shown in
Figure 4
.
Figure 3 Figure
4
Step5: Slightly adjust the camera lens to where it’s supposed to face, and replace Part 1 and Part 2 back, as shown in
Figure 5
and
Figure 6
.
Step6: Hold the camera lens and Part 1, rotate only Part 2 clockwise to the end, and replace the screw removed in Step1
back, as shown in
Figure 6
.
Figure 5 Figure
6
Step7: Power on your camera, and check the viewing angle on the PC.
Step8: Adjust the position, viewing angle, focal length and focus of the
camera, if necessary.
For focal length and focus adjustment, please check
Figure 7
to know where to do.
Figure 7
