CAMERA PARAMETERS
On the DVR, right-click to show the main menu, and go to
ADVANCED CONFIG
DCCS
.
In
DCCS
, select the channel which connects this camera, and click
SETUP
to enter the menu of camera
parameters.
ADVANCED CONFIG
CAMERA
CH1 CH2 CH3 CH4
DETECTION
MENU SETUP
ALERT
NETWORK
DISPLAY
RECORD
F.W. 1015
DCCS
DEVICE AVTXXX
NOTIFY
CONNECTION OK
EXIT
Item
Description
BRIGHTNESS
Click the current value to manually adjust the brightness of the image. The higher the value, the
brighter the image.
CONTRAST
Click the current value to manually adjust the contrast of the image. The higher the value, the higher
the contrast ratio.
HUE
Click the current value to manually adjust the hue of the image.
SATURATION
Click the current value to manually adjust the saturation of the image. The higher the value, the
more saturated the image.
DISPLAY ZOOM RATIO
Select to display the zoom ratio on the screen or not.
VIDEO FORMAT
Select the video format:
NTSC
/
PAL
.
WHITE BALANCE
Process the current image to retain color balance over a color temperature range.
The options are:
Auto
,
2500K
,
3200K
,
4200K
,
5800K
&
9500K
.
9500K = Partially cloudy; 5800K = Mid summer; 4200K = White fluorescent; 3200K = Halogen light
bulb; 2500K = Halogen light bulb.
SHARPNESS
Sharpness enhances the clarity of image detail by adjusting the aperture and sharpening the edges
in the pictures.
Click the current value to manually adjust the sharpness of the image. The higher the value, the
sharper the image.
SLOW SHUTTER
Slow shutter is used to increase the exposure time to get clearer image, for example, at night. It’s
enabled only in the dark environment.
The options are:
AUTO
,
1/15
and
1/6
.
MIRROR
Select
ON
to turn the images horizontally based on your installation situation when necessary.
FLIP
Select
ON
to flip the image 180° when necessary.
3D DENOISE
Click and drag the slider to adjust the level from
0
~
5
to decrease the noise shown in the dark
environment.
3D denoise analyzes successive pictures to decrease the noise dramatically, but the moving objects
might be shown as blurred.
2D DENOISE
Click and drag the slider to adjust the level from
0
~
5
to decrease the noise shown in the dark
environment.
2D denoise analyzes only a single picture to decrease the noise. The moving objects can remain
smooth edges, but the effect might be limited.
EXPOSURE VALUE
Drag the slider to adjust the exposure level from
0
~
4
. The higher the value, the brighter the image.
WIDE DYNAMIC RANGE
Wide Dynamic Range (WDR) is used when users need to increase image recognizability in an
environment where very bright and dark areas exist simultaneously.
The options are:
LOW
/
MIDDLE
/
HIGH
/
OFF
. The more extreme the bright and dark areas exist
simultaneously in an environment, the higher the value should choose to get clear images.
FIXED SHUTTER
Shutter Speed is a function that can adjust the duration of the electronic shutter to produce optimum
image quality. Select the shutter speed suitable for your environment.
The options are:
OFF
,
FIX 1/15
,
FIX 1/25
,
FIX 1/30
,
FIX 1/50
,
FIX 1/60
,
FIX 1/100
,
FIX
1/120
,
FIX 1/250
,
FIX 1/500
,
FIX 1/1000
,
FIX 1/2000
,
FIX 1/5000
,
FIX 1/10000
.
FOCUS MODE
Select the default focus mode when you’re adjusting the focal length and focus as described in the
previous section of “FOCAL LENGTH & FOCUS ADJUSTMENT”. Choose “AUTO” to always
automatically adjust the focus first when the focal length is changed; choose “MANUAL” to allow
manually focus adjustment first when the focal length is changed.