INSTALLATION
Step1: Disassemble the camera case into three parts as illustrated in
Figure 1
.
Part 1
Part 2
Base
Figure 1
Step 2: Locate where you want to install this camera (wall or ceiling), and drill holes on the wall or ceiling for securing
the bracket and routing the cables (if necessary).
Step 3: Attach the bracket to the wall (or ceiling), and make sure the cables are routed and arranged properly in the
bracket, as shown in
Figure 2
.
Step 4:
Secure the bracket to the wall (or ceiling), as shown in
Figure 4
.
Figure 2
Figure 3
Step 5:
Slightly adjust the camera lens to where it’s supposed to face, and replace Part 1 and Part 2 back, as shown in
Figure 4 and
Figure 5
.
Step 6: Hold the camera lens and Part 1, and rotate only Part 2 clockwise, as shown in
Figure 5.
Figure 4
Figure 5
Step 7:
Power on your camera, and check the viewing angle on the PC.
Step 8: Adjust the position, viewing angle, focal length and focus of the camera, if necessary.
For focal length and focus adjustment, please check Figure 7 to know where to do.
Figure 7