Avtech AVT1105XT, Руководство пользователя

Страница: 6 / 7

MENU DESCRIPTION
DAYNIGHT EXT ALS IN
DELAY
0 ~ 255 Set the delay time in second after which the day and night
switch is made.
This is used for the environment where the light condition
may change suddenly and usually last for a short time, for
example, the entrance of a parking lot. It may cause the
day & night mode switching constantly and damage the
camera.
With this function, the camera will delay the mode switch
at night since the light change is temporary and
unnecessary to pay attention.
B&W Always keep the day and night mode to night mode.
OFF Always keep the day and night mode to day mode.
IMAGE NR AUTO Automatically reduce noise in the image based on the
current environment.
MANUAL STRENGTH Set the level to enable noise reduction.
OFF Choose to disable this function.
DWDR ON / OFF DWDR is used to increase image recognizability in
overexposure and dark areas.
Choose
ON
/
OFF
enable / disable this function.
PRIVACY OFF Disable this function.
ON COLOR Choose the color for the area selected in
MASK SEL
.
You can choose
NO COLOR
to disable this function,
MOSAIC
for mosaic display, or
1
~
14
for different
colors.
MASK SEL Select the area you want to mask. Up to four areas could
be configured.
MASK DRAW Set the size of the masked area:
1. Click

and change the
size by clicking

,

,

and

.
2. Click

again and
change the size by clicking

,

,

and

.
3. Click

again to finish and exit.
MOTION OFF Choose to disable motion detection.
ON (BORDER) AREA SEL Select the area you want to detect. Up to four areas could
be configured.
The area will be framed and flashed when a motion event
occurs.
POSITION Choose
ON
to show where the area selected in
AREA
SEL
is and set the size of the area:
1. Click

and change the
size by clicking

,

,

and

.
2. Click

again and
change the size by clicking

,

,

and

.
3. Click

again to finish and exit.
SENSITIVITY Set the sensitivity for motion detection.
The larger the value, the more sensitive the detection.
COLOR Choose the color for the selected area to show when a
motion event occurs:
RED
/
GREEN
/
BLUE
/
WHITE
.
TRANS Choose the transparent level for the selected area when
a motion event occurs.
The larger the value, the more transparent the area.