Avtech AVR-E3-B, Инструкция по эксплуатации

Страница: 21 / 54

6. GPIB Connector. A standard GPIB cable can be attached to this connector to allow
the instrument to be computer-controlled. See the “Programming Manual for -B
Instruments” for more details on GPIB control.
7. RS-232 Connector. A standard serial cable with a 25-pin male connector can be
attached to this connector to allow the instrument to be computer-controlled. A user
name (“admin”) and a password (“default”, as shipped from the factory) are required
when logging into a serial terminal session. The internal controller attempts to auto-
sense the parity setting. It may be necessary to send a few return characters before
attempting a login in order to provide enough data to allow this auto-sensing to work.
(A standard Linux “agetty” process is used to implement serial control internally.) See
the “Programming Manual for -B Instruments” for more details on RS-232 control.
8. Network Connector. (Optional feature. Present on -VXI units only.) This Ethernet
connector allows the instrument to be remotely controlled using the VXI-11.3, ssh
(secure shell), telnet, and http (web) protocols. See the “Programming Manual for -B
Instruments” for more details.
9. AMP Connector. (Optional feature. Present on "-EA" units only.) The output amplitude
can be set to track the voltage on this input. Zero Volts in corresponds to zero
amplitude output, and +10V in corresponds to maximum amplitude out. This mode is
activated by selecting "Ext Control" on the front-panel amplitude menu, or with the
"source:voltage external" command.
10.OS Connector. (Optional feature. Present on “-OS” and “-OT13” units only.) The
desired DC offset is applied to this connector. Internally, it is connected to the output
centre conductor via a high quality RF inductor. Do not exceed ±50V, 250 mA. For
units with the -OT13 option, the OS ON/OFF switch must be in the OFF position for
this input to be connected to the internal bias tee.
Not shown:
11. OS ON/OFF Switch. (Optional feature. Present on units with the -OT13 option only). If
this switch is set to “ON”, the instrument generates a DC offset internally. The
magnitude of this offset is controlled by the front panel settings. If this switch is set to
“OFF”, a user-generated DC offset may be connected to the “OS” BNC connector. Do
not exceed ±50V, 250 mA.
21