16
3.6.2 Push Video
“Push Video” is an active notification system, different from traditional FTP and Email notification methods.
Note:
For Push Video to work properly, make sure the record function is on in “Record” “Record”, and
the record timer for the external alarm is on in “Record” “Record Timer”.
Item
Description
Guard
Select to enable or disable Push Video. This function can also be enabled from your iPhone or Android mobile devices.
When this function is enabled, the image resolution is fixed to “VGA”.
Slow Shutter Lock
Select to fix the slow shutter level to level 2 (Enable) or remain the current slow shutter level (Disable) when Push Video
is enabled.
When this function is enabled, it could ensure Push Video recording to get clear images when the environment is dark.
This function is set to “Enable” by default.
Guard Rule
Select the rule to enable Push Video from “External Alarm”, “Internal Alarm”, or “Internal Alarm OR External Alarm”.
External Alarm – The alarm device additionally connected to your camera
Internal Alarm – The human detection function built in this camera
This function is set to “Internal Alarm OR External Alarm” by default.
Message
Define the context when you receive the Push Video message on your iPhone or Android mobile device. Up to 28
characters are allowed.
To schedule when to enable or disable Push Video, please enable the Push Video timer, and select and day and
time to enable this function.
3.7 General
3.7.1 General
To change the language of UI interface, select from the drop-down list in “Language”.
To allow the status LED indicators to show the status as indicated in “1.6 Status Indicator” at page 2, select
“Enable” in “Status LED Mode”; to hide the status, select “OFF”; to only show the error status, select “Temporary
Disable”.
Note:
The status LED mode will be restored to “Enable” after camera reboot when “Temporary OFF” is
selected.
To lock camera access when it’s not used after the specified time, select “5 MIN”, “15 MIN” or “30 MIN” from the
drop-down list of “Auto Lock Time”, or select “NEVER” to disable this function.
Note:
When the camera access is locked after the specified time, to resume camera access, please
enter the password.