7
Function
Icon
User Level
Description
Live
Supervisor / Power User
/ Normal User / Guest
Switch to the live view page.
DPTZ
Supervisor / Power User
/ Normal User
Switch to the DPTZ configuration page.
For details, please refer to “2.3 Digital PTZ (DPTZ) Operations” at page 8.
Backup
Supervisor / Power User
Enter the event record list for video playback.
For details, please refer to “2.4 Event Record Search & Playback’ at page 9.
Config.
Supervisor
Switch to the system configuration page, and the functions available for
“Supervisor” and “Power User” are different.
For details, please refer to “3.1 System configuration menu” at page 10.
Arrow keys panel
--
Supervisor / Power User
/ Normal User
Click to move the camera lens up / up-left / down / up-right / left /
down-right / right / down-left.
Turbo
Supervisor / Power User
/ Normal User
Speed up one mouse-click from 1 to 10.
Note: When this function is enabled, the supported buttons will turn
to red.
Ex: If the value of the turbo step is set to 5, one mouse-click will function as 5
mouse-clicks when you click the arrow keys.
To use this function, you need to set it in “General”
“General”.
Preset points
--
Supervisor / Power User
/ Normal User
Click the numbering of the preset point you want to move the PTZ camera
to the selected preset point.
To set preset points, please refer to “3.3.2 Preset” at page 16.
Zoom-in / out
/
Supervisor / Power User
/ Normal User
Click to zoom in / out the current image.
Max. Zoom-in / out
/
Supervisor / Power User
/ Normal User
Click to zoom in the image to the largest / zoom out the image to its
original size.
Focus near / far
/
Supervisor / Power User
/ Normal User
Click to adjust the clearness of the video images.
Full Screen
Supervisor / Power User
/ Normal User
Click to display the image in full screen.
To exit the full screen mode, press “Esc” on your keyboard.
Snapshot
Supervisor / Power User
/ Normal User
Click to take a snapshot of the current view on a new window. Right click
on the picture and re-save it to the location you want.
Auto Mode
Supervisor / Power User
/ Normal User
Click to activate the auto function. Before using it, you need to assign a
specific function that will be enabled when “AUTO” is clicked.
For details, please refer to “3.3.3 Cruise” at page 16.
This function will be disabled when DPTZ is enabled.
Auto Move
Supervisor / Power User
/ Normal User
Click to enable the auto move function. It allows the camera to move to the
direction where your cursor stays.
This function will be disabled when DPTZ is enabled.
Manual Alarm Out
Supervisor / Power User
/ Normal User
Click to force the connected alarm-out device to work. For example, when
your alarm device is a buzzer, click this button and your buzzer will start to
sound even if there’s no alarm event.
Live View Size:
Supervisor / Power User
/ Normal User
Normal Size
The current live view size is the same as the selected resolution.
Fit to screen
The selected resolution is resized to fit into the current live view size.
This icon doesn’t work when the selected resolution is VGA or QVGA.
Scale*
Click and hold the movable square on the left bottom corner of the live view
to move
This icon appears only when the selected resolution is larger than the current live
view size.
Double Size
The QVGA resolution is resized to fit into the current live view size.
This icon appears only when the selected resolution is QVGA (320 x 240) or CIF
(352 x 240).
DPTZ
Supervisor / Power User
/ Normal User
Click to enable digital PTZ functions with zoom-in ratio up to 16X.
Focus Zone
Supervisor / Power User
/ Normal User
Click to assign the point for focus adjustment.
This function will be disabled when DPTZ is enabled.
