ADJUST FOCAL LENGTH & FOCUS (Selected Model Only)
Insert Micro SD Card
Note: The appropriate temperature for focus adjustment is
0
˚
C ~ 40
˚
C, and prevent adjusting in moisture
environment.
Step1: Loosen the screw, take the shield off your camera,
and rotate the front cover to remove it
Step2: Find two handles on the camera to adjust focal
length and focus. Move the handle near to the
main board first to find the best surveillance area,
and move the hand near to the lens to adjust the
sharpness of the image.
Step3: Replace the old desiccant with a new one, supplied
in the package.
Step4: Place the front cover back.
Step5: Slide to mount the shield on the camera before
tightening the screw.
Only selected models are equipped with a micro SD card
slot for local video recording.
The data originally saved in the micro SD card (if any) will be
removed after inserting it to the camera.
The camera doesn’t support hot-swapping. Please insert or
remove the micro SD card with power disconnected.
Please follow the directions in the below graphic to insert Micro
SD card properly:
Note: It’s recommended to use a pair of tweezers for inserting
/ removing Micro SD card.
CAMERA CONFIGURATION
For advanced configuration of your camera, please be
sure you have connected your camera to NVR as
shown below:
Step1: Connect PC to the HUB connected to your camera(s) with RJ45 network cable.
Step2: Search available devices with “IPScan.exe”; to download “IPScan.exe”, please visit
www.surveillance-download.com/user/IPscan.zip
Step3: After searching, set your PC in the same network segment as the specific camera you want to access, such as
“192.168.30.xxx” (xxx could be 0~255) in our example
Step4: Note down the IP address and port number of the camera you want to access, such as “192.168.30.1” and “88” in our
example.
Step5: Open Internet Explorer on the PC, and enter the IP address and port number in the URL column to access the camera.
The format is http://ipaddress:portnum, such as
http://192.168.30.1:88
in our example.
