Avtech AVM302A, Руководство по эксплуатации

Страница: 13 / 60

8
3. CAMERA CONFIGURATIONS
Users can further configure this network camera by accessing via Internet Explorer.
3.1 System configuration menu
Click “Config.” to enter the configuration page.
Note: You need to be “Supervisor” to enter the system configuration page. If you’re not a “Supervisor”,
please re-log into the camera with the correct user name and password.
The functions are categorized into six menus: Network, Camera, Record Timer, Storage, Trigger and General.
 For details about “Network”, please refer to “3.2 Network” at page 9.
 For details about “Camera”, please refer to “3.3 Camera” at page 12.
 For details about “Record”, please refer to “3.4 Record” at page 14.
 For details about “Storage”, please refer to “3.5 Storage”’ at page 15.

For details about “Trigger”, please refer to “In “Memory”,
you can check the remaining capacity for recording, or
clear all recorded data saved if needed.
Note: The recorded data will be removed also when you reset or reboot this camera.
For models without a micro SD cart slot, you can only record a limited number of recordings.
For models with a micro SD cart slot, you could insert a compatible micro SD card for more video recording.
Note: To know how and where to insert a micro SD card, please refer to “1.8 Insert a Micro SD Card
(Selected Models Only)” at page 3.
To know the compatible list of micro SD cards, please refer to “APPENDIX 5 MICRO SD CARD
COMPATIBLE LIST” at page 26.
Note: To save more recorded data, it’s recommended to use this camera with the compatible NVR.
Note: To know the total recording time per recording resolution, please refer to “APPENDIX 4
RECORDING TIME TABLE” at page 25.

3.6 Trigger
” at page 15.
 For details about “General”, please refer to “3.7 General” at page 17.