MAIN MENU
34
5.4.8 NOTIFY
You can configure this recorder to send notifications for certain events to mobile devices with our mobile app,
EagleEyes, installed, or to the specified E-mail address(es).
PUSH VIDEO
(for selected models only)
Before using this function, make sure:
The camera connected to this recorder is our ETS network camera series.
You have iPhone
®
, iPad
®
, or Android™ mobile phone or tablet.
You have subscribed the mobile network service from your mobile service provider.
The mobile app, EagleEyes, is installed in your mobile device. For details, please refer to “APPENDIX 4 MOBILE SURVEILLANCE
VIA EAGLEEYES” at page 42.
You have configured EagleEyes to access this recorder, and Push Video is enabled. For details, please refer to “APPENDIX 5 SET
PUSH VIDEO” at page 43.
You’ll get an active event notification with video telling you the occurrence of alarm event(s).
ADVANCED CONFIG
CONNECTION
PUSH VIDEO
PUSH STATUS
MESSAGE MAIL
VIDEO MAIL
CAMERA
GUARD ON
DETECTION
CH01 ALARM
N.C.
CH1
alarm
ALERT
CH02 ALARM
N.O.
CH2
NETWORK
CH03 ALARM
OFF
CH3
DISPLAY
CH04 ALARM
OFF
CH4
RECORD
NOTIFY
PSE
MULTICASTING
EXIT
Step1: Switch “GUARD” to “ON”.
Step2: Select the channel number with our ETS network camera connected, and select the alarm type to
“ALARM N.C.”, “ALARM N.O.”, or “INTERNAL ALARM” (shown only when the connected ETS camera
has an alarm sensor built-in).
Step3:Customize the notification message you want to see after alarm type setting, or keep the default message,
which shows only the channel numbering.
Step4: Enable “Push Video” in EagleEyes on your mobile device, and try to trigger an alarm event to see if you’ll
get
Push Video.
