MAIN MENU
33
7.4.3 DETECTION
ADVANCED CONFIG
CONNECTION CH1
CH2 CH3 CH4 CH5 CH6 CH7 CH8 CH9 CH10 CH11 CH12 CH13 CH14
CAMERA
ALARM OFF
DETECTION
INTERNAL ALARM
(Depending on the camera you connected)
OFF
ALERT
SENSITIVITY
NETWORK
MOTION ON
DISPLAY
AREA EDIT
RECORD
PRIVACY MASK
SETUP
NOTIFY
REGION OF INTEREST
SETUP
MULTICASTING
JOYSTICK
EXIT
1) ALARM
Select
N.C
./
N.O
depending on your installation need. The default alarm value is
OFF
.
2) INTERNAL
ALARM
(Depending on the camera you connected)
This option is available only when the camera you connected has a PIR sensor built-in.
3) SENSITIVITY
Select the detection sensitivity of the selected channel.
4) MOTION
Select if you want to activate the motion detection function for the selected channel (
ON
/
OFF
).
5) AREA
Click
EDIT
to set the motion detection area.
There are 16 × 12 grids per camera for all channels. Pink blocks represent the area that is not being detected
while the transparent blocks are the area under detection.
Note:
To exit area setting and return to the detection page, right click your mouse.
6) PRIVACY MASK
You can cover certain areas on the camera image with privacy masks.
Note:
Up to 20 areas could be added.
PRIVACY MASK
MOSAIC SIZE
8x8
NAME FUNCTION
MOSAIC
COLOR
MOSAIC COLOR
TRANSPARENCY
MASK1 OFF OFF ON
0%
MASK2 ON ON ON
25%
ADD
EDIT
DEL
Select
ADD
to add a new setting,
EDIT
to modify an existing setting, and
DEL
to remove a setting.
