6
2)
Connect all disk arrays with SCSI cables and turn the power on
(hub disk array only):
Connect all disk arrays to the provided adapters.
Connect all disk arrays with SCSI cables:
Connect from one of the three device ports at one IDA rear panel to the
host port of another disk array.
One disk array (as the master layer) can connect up to 3 disk arrays as
the second layer, and each disk array in the second layer can
respectively connect up to 3 disk arrays as the third layer.
For details, please refer to the illustration below.
Note:
The maximum layer number is 3, totally 13 IDA.
In order to accurately detect all the connected disk arrays, please make
sure to turn on the power of all the disk arrays after the connection is
completed.
2)
Connect to DVR with a SCSI cable :
Connect the host port of the master disk array to the “DISK ARRAY” port
of your DVR. Please refer to the illustration below.
