Avtech AVC467A, Руководство пользователя

Страница: 10 / 18

4
CONNECTION
1. Connect the power connector of the camera to a DC 12V regulated power
supply.
NOTE: Please use a regulated DC12V power adaptor to operate this unit. The power
tolerance of this unit is DC12V ± 10% (DC 10.8V ~ DC 13.2V). A power input of
more than the DC 13.2V will damage this unit.
2. Connect the camera video output to the input of the DVR with a 75 Ω coaxial
cable.
3. (Optional) Connect to an alarm device as described in the manual of the alarm
device with the “
Alarm in
” and “
GND
” wires. Then, go to DVR’s menu
(
ADVANCED CONFIG DETECTION ALARM
) to enable alarm
detection.
4
CONNECTION
1. Connect the power connector of the camera to a DC 12V regulated power
supply.
NOTE: Please use a regulated DC12V power adaptor to operate this unit. The power
tolerance of this unit is DC12V ± 10% (DC 10.8V ~ DC 13.2V). A power input of
more than the DC 13.2V will damage this unit.
2. Connect the camera video output to the input of the DVR with a 75 Ω coaxial
cable.
3. (Optional) Connect to an alarm device as described in the manual of the alarm
device with the “
Alarm in
” and “
GND
” wires. Then, go to DVR’s menu
(
ADVANCED CONFIG DETECTION ALARM
) to enable alarm
detection.
alarm shop