Avtech AV-110D-PS, Инструкция по эксплуатации

Страница: 6 / 29

SPECIFICATIONS
Model: AV-110D-PS
Output amplitude: 0 to ±30 V
Maximum current: 600 mA
Load impedance: ≥ 50 Ω
Output resistance 1 : ≈ 0Ω
Bandwidth (f
-3dB
): 1000 kHz
Rise time (20%-80%,
for maximum output):
0.08 us
Output power (maximum) 18 W
Voltage gain 2 : ×1 to ×15
Gain polarity: Standard: Non-inverting (+)
Optional 5 : Switchable between Non-inverting (+) and Inverting (-) modes
Input range 2 : 0 to ± 2 Volts (1 kΩ input impedance)
Dual channel: Optional 3
Regular DC offset option 2,4,7 : ± 15 V
Extended DC offset option 2,6,7 : ± 30 V
Connectors: In, Out: BNC
Dimensions: 100 mm x 430 mm x 375 mm (3.9” x 17” x 14.8”)
Power requirement: 100-240 Volts, 50-60 Hz
1) “Output resistance” is the internal resistance in series with output. Non-zero output impedances (R
OUT
) will reduce the maximum output amplitude
slightly when operating into low load impedances. That is, V
OUT
= V
SET
× R
LOAD
/ (R
LOAD
+ R
OUT
), where V
SET
is the set amplitude and R
LOAD
is the load
resistance.
2) These parameters can easily be adapted to meet special requirements. Contact Avtech (info@avtechpulse.com) with your special application!
3) To specify the two channel option add the suffix -D to the model number.
4) To specify the regular DC offset option, add the suffix -OS to the model number.
5) Add the suffix -INV to specify the switchable gain polarity feature.
6) To specify the extended DC offset option, add the suffix -OS to the model number.
7) The sum of the amplitude and the offset must remain within the rated output amplitude range – i.e., this option does not change the minimum or
maximum obtainable output voltage.
6