7
3. CAMERA CONFIGURATIONS
Users can further configure this network camera by accessing via Internet Explorer.
3.1 System configuration menu
Click “Config.” to enter the configuration page.
The functions are categorized into seven menus: Network, Camera, VA, Record, Storage, Trigger and General.
For details about “Network”, please refer to “3.2 Network” at page 10.
For details about “Camera”, please refer to “3.3 Camera” at page 16
For details about “VA”, please refer to “3.4 VA” at page 21
For details about “Record”, please refer to “3.5 Record” at page 21.
For details about “Storage”, please refer to “3.5.2 Record
Timer
To schedule alarm and motion recording, enable it, and select the day and time for recording.
Note:
The timer must be enabled for the record function to work properly.
Note:
The selected time will be yellow-colored.
3.6 Storage
” at page 22.
For details about “Trigger”, please refer to “3.7 Trigger” at page 22.
For details about “General”, please refer to “3.8 General” at page 24.
Main Menu
Sub-Menu
Reference
Network
Network
Configure network settings.
QoS
Limit the data flow for live streaming.
DDNS
Enter DDNS information when the network type is PPPOE or DHCP.
SNTP
Synchronize your camera time with the networked computer systems.
FTP
Enter the FTP information for event notifications when “FTP” is chosen in “Trigger”
→
“Trigger”.
Enter Email information for event notifications when “Email” is chosen in “Trigger”
→
“Trigger”.
SMS
Enter text messaging information for SMS notifications when “SMS” is chosen in “Trigger”
→
“Trigger”.
Filter
Choose to permit or block the IP address(es) which can access this camera.
UPnP
*Suitable for Windows-based operating system.
Allow this camera to be detected among devices within the same network area for easy and
quick usage.
Bonjour
*Suitable for Apple Mac-based operating system.
Allow this camera to be detected among devices within the same network area for easy and
quick usage.
RTP
Set the parameters for video data transmission when you’re using multimedia other than web
browsers and Video Viewer for remote access.
SNMP
Configure SNMP to remotely manage network devices.
IEEE 802.1X
The settings here enable the camera to access a network protected by 802.1X/EAPOL
(Extensible Authentication Protocol Over LAN).
Network Share
Assign a location in the LAN environment to save the snapshot of events when “Network
Share” is chosen in “Trigger”
→
“Snapshot”.
Network Failure Detection
Configure this camera to check the network connection of other device periodically, and send
notifications via Email or FTP for disconnection events.
Camera Camera
1. Rename the camera.
2. Change the place where the camera name is shown on the screen.
