3
Flange Back Adjusting Ring
Back focal lock hexagonal bolt
NOTE
: Focus or Flange-Back Ring Adjustment
1. Mount the lens
by turning it clockwise on the lens mount of the camera.
2. Loosen the screws on the flange-back adjusting ring.
3. Turn the flange-back adjusting ring to the desired position.
4. Tighten the screws on the flange-back adjusting ring.
PRECAUTIONS
Do not install the camera in an environment where the humidity or temperature is high
Do not install the camera under the unstable lighting condition
Do not expose the camera to rain or moisture
Do not keep the camera face to strong light directly
Do not touch the front glass of the camera
Do not use other than specified power source
Do not disassemble the camera
CAMERA PARAMETERS
There are five buttons on the camera rear panel for users to further configure camera parameters.
If you want to …
Press …
Enter the camera configuration menu
MENU
Move to the sub-menu you want
↑
/
↓
Change setting
←
/
→
Enter the configuration page of an option
ENTER
Menu Tree
For options with , press the button “ ” (Enter) to enter their respective setting pages.
SUB-MENU OPTIONS
LENS MANUAL
AUTO
TYPE
DC / VIDEO
MODE
AUTO / OPEN / CLOSE
SPEED
0 ~ 255
SHUTTER / AGC
AUTO HIGH
LUNINANCE MODE
SHUT
BRIGHTNESS
0 ~ 255
LOW LUMINANCE
MODE
AGC / OFF
BRIGHTNESS
x0.25 / x0.50 /
x0.75 / x1.00
MANUAL MODE
SHUT
+
AGC
SHUTTER
1/50; 1/120; 1/250; 1/500; 1/1000; 1/2000;
1/4000; 1/10000
AGC
6.00 / 12.00 / 18.00 / 24.00 / 30.00 / 36.00 /
42.00 / 44.80
