![AVT Manta G-031B/C Скачать руководство пользователя страница 30](http://html1.mh-extra.com/html/avt-manta/g-031b-c/g-031b-c_technical-manual_3034341030.webp)
Specifications
MANTA Technical Manual
V6.0.1
30
Manta G-125B/C
Feature
Specification
Sensor
Type 1/3 (diag. 6 mm) progressive scan SONY IT CCD ICX445ALA/AQA with
EXview HAD microlens
Effective chip size
4.8 mm x 3.6 mm
Cell size
3.75 μm x 3.75 μm
Resolution (max.)
1292 x 964 pixels
Lens mount
C-Mount: 17.526 mm (in air); Ø 25.4 mm (32 tpi)
maximum protrusion: 9.7 mm
(see
Figure 39: Manta C-Mount dimensions (16 mm filter, type A)
on page
81)
CS-Mount: 12.526 mm (in air); Ø 25.4 mm (32 tpi)
maximum protrusion: 5.1 mm
(see
Figure 40: Manta CS-Mount dimensions (type A)
on page 82)
ADC
14 bit
Pixel format
GenICam:
Only monochrome:
Mono8, Mono12Packed, Mono12
Only color:
BayerGB8, BayerGB12Packed, BayerGB12, Mono8,
RGB8Packed, YUV411Packed, YUV422Packet, YUV444Packed,
BGR8Packed, RGBA8Packed, BGRA8Packed
Displayed with
PvAPI
as:
Only monochrome:
Mono8, Mono12Packed, Mono16
Only color:
Bayer8, Bayer12Packed, Bayer16, Mono8, RGB24, YUV411,
YUV422, YUV444, BGR24, RGBA32, BGRA32
Frame rates
Up to 30 fps
Gain control
Manual: 0-31 dB (1 dB/step); auto gain (select. ROI)
Exposure time
21 μs … 60 s; auto shutter (select. ROI)
External trigger event
Rising edge, falling edge, any edge, level high, level low
External trigger delay
0 to 60 seconds in 1 μs increments
Fixed rate control
1 fps ... max. frame rate (steps of 0.1 fps)
Imaging modes
Free-running, external trigger, fixed rate, software trigger
Sync Out modes
Trigger ready, trigger input, exposing, readout, imaging, strobe, GPO
Table 8: Specification Manta G-125B/C
Note
Maximum protrusion
means the distance from lens flange to
the glass filter in the camera.