© 2021 AVSS
–
ALL RIGHTS RESERVED
40
PRS-M300 USER MANUAL FOR DJI M300 RTK
Operating Procedures
1.
Hangar Checklist
Make sure manual triggering device battery is fully charged
Make sure the electronic module battery is charged more than 25%
Make sure that the memory card is inserted and has enough storage space
2.
Installation Checklist
Ensure that the PRS-M300 and bracket are not damaged
Insert Attachment Bracket legs, two per side, to the bracket leg connectors
Ensure that the PRS-M300 top plate and main system are securely attach
Verify that bracket is secure to the DJI M300 RTK
Check that the FTS connectors on the electronics module, FTS module and cable are
clean and undamaged
Plugin HR30 FTS cable to FTS module
Passing under the landing gear leg, plug the HR30 FTS cable into the electronics
module
Ensure that the HR30 FTS cable is securely connected and cannot interfere with
propellers
Check that manual triggering device antenna is oriented vertically
3.
Pre-Flight Checklist
Perform DJI M300 RTK Preflight checks
Ensure DJI M300 RTK is in position mode
Connect the HR30 FTS cable with PRS-M300 electronic module
Turn on PRS-M300 Manual Triggering Device
Turn on PRS-M300 by turning on the DJI M300 RTK
Check continuity light
Check the buzzers and lights (heartbeat)
Check battery level and ensure it is at least 50%
Wait for successful initialization
Ensure no errors are present
Move at least 5 meters away from the DJI M300 RTK
Arm the manual triggering device
by holding down the “Arm” button
for about 2
seconds and will provide audio fe
edback with the statement of “Remote Armed”
Takeoff and climb to minimum deployable altitude
AUTO-TRIGGER WILL ONLY ARM ONCE AN ALTITUDE OF 43
METERS IS REACHED.
