adjust the individual speaker sound level respectively. User can also drag and drop the “Red Dot” for speedy
adjustment.
Press the “CENTER” button will bring the “Red Dot” back to the center and all four speakers will output
the same sound level.
“Ex Amplifier” option controls the switching on of External Amplifier attached to the system.
5.3
Loudness Setting
Adjust the slider up and down in the “Loud” bar to change the current loudness value. Increase loudness
value will enhance the gain of low frequency sound. Depends on the speakers system in the car, excessive
loudness may result in sound distortion.
5.4
Subwoofer Setting
Slide the “SubWoof” bar up and down to change the SubWoofer output value. This only works if an external
sub-woofer box is connected to the system.
6
Video Settings
6.1
Watching video is forbidden while driving
When this function is switched on and the signal detection wire is connected to the hand brake, all Video
playback will have sound only and blank screen.
Note: for safety reasons, it is recommended to switch on this setting.
6.2
Reverse Video Mirrored
According to the reverse camera installed, please adjust this setting if the reverse camera image is left and
right flipped over.
AVSON MTK User Manual-en
Page 11 / 28
