Avsl QU4 Скачать руководство пользователя страница 3

 

171.840, 171.841, 171.842 User Manual 

Introduction 

 

Thank you for choosing the Chord QU4 wireless system. This professional wireless set provides 4 high quality 

microphones with UHF radio system for freedom of movement without loss of audio quality. Please read this 

manual before using this item in order to avoid damage and to get the best performance from your purchase. 

 

Package Contents 

 

 

UHF quad wireless receiver 

 

19” rack ears 

 

2 x antennae 

 

Mains power adapter 

 

6.3mm mono jack lead 

 

8 x 1.5V AA battery  

 

QU4-H version – 4 x handheld transmitters 

 

QU4-N version – 4 x neckband micro 4 x beltpack transmitters  

 

 

QU4-C version – 2 x handheld transm 2 x neckband micro 2 x beltpack transmitters 

 
If you find any accessory is missing or the product has arrived with any problems, please contact your retailer. 
This product contains no user-serviceable parts so make no attempt to try to fix or modify this item yourself 

as this will invalidate the warranty. We recommend you keep the original package and proof of purchase for 

any possible replacement or returned demand. 
 

Warning 

 

To prevent the risk of fire or electric shock, do not expose any of the components to rain or moisture. 

If liquids are spilled on any component, stop using immediately, allow unit to dry out and have checked by 

qualified personnel before further use. 

Avoid impact or heavy vibration to any of the components, dropping the microphone can cause capsule 

failure. 

No user serviceable parts inside transmitter or receiver - refer servicing to qualified service personnel. 

 

Safety 

 

 

Ensure that the correct adapter is used with adequate current rating and that the mains voltage is as 

stated on the adapter 

 

Avoid ingress of water or particles into the transmitters or receiver 

 

Use alkaline or NiMH batteries in the transmitters and remove if unused for long periods 

 

Observe the correct polarity when replacing batteries 

 

Placement 

 

 

Keep all components out of direct sunlight and away from heat sources 

 

Do not place heavy objects on top of the receiver or transmitters 

 

If rack-mounting, use the rack-ears provided and do not place heavy equipment above the receiver 

 

Take care to keep antennae from sticking out where they may get damaged 

 

Keep the transmitters and receiver away from damp or dusty environments 

 

Cleaning 

 

 

Use a soft cloth with a neutral detergent to clean the body of the handheld transmitter and receiver. 

 

Lightly damp sterile wipes may be used on the microphone grilles for hygiene purposes 

 

To avoid damage, do not use solvents to clean the components 

 

Содержание QU4







Отзывы: