156.789UK, 156.799UK User Manual
Jointing
–
before jointing, strip the clear coating to expose the copper tracks. Make sure the joining track is properly stripped and clean
as any residue may affect the connection of the tape. Slide the stripped end of the tape underneath the spring clips, ensure the copper
track is in contact properly with the clips and close the snap on coupler. Please ensure that the +12V marks are connected together
correctly as shown below.
Step 3: Installation:
After all desired lengths of tape are cut/joined, connect them together using the 4 pin connectors supplied. Always ensure that the
polarity marked on the tape is lined up correctly and insert the 4 pin connector fully on each end. Plug in the power supply to test that
the tape is fully functional before fixing to the frame
All tapes are fitted with self-adhesive backing for easy fixing, Clean the surface of
the frame where the tape will be installed, remove the backing paper and push the
tape firmly onto the surface. It is recommended to work 5cm at a time to ensure a
professional finish.
Specification:
Lead length
1.25m (switch 0.3m from connector)
Beam angle
130
°
to 150
°
Cut interval
10cm
LED type
SMD5050 RGB
IP Rating
IP65
Lumens per LED
16lm
Power consumption
7.2W/m
Current consumption
600mA/m
LED spacing
32mm
Cross-section
10 x 2.4mm
Model
156.791UK
156.792UK
Power supply
12Vdc, 1000mA
12Vdc, 2000mA
LED quantities
42 (9 per strip, 3 per corner)
78 (18 per strip, 3 per corner)
Length
4 x 300mm strips
4 x 600mm strips
Weight
330g
530g
Disposal:
The “Crossed Wheelie Bin” symbol on the product means that the product is classed as Electrical or
Electronic equipment and should not be disposed with other household or commercial waste at the end of its useful life.
The goods must be disposed of according to your local council guidelines.
Errors and omissions excepted.
Copyright © 2015. AVSL Group Ltd.
