CAB Series User Manual
Rear panel
Setting up
The CAB series enclosures are fitted with a 35mmØ pole mount socket at the base.
For pole mounting, ensure that the stand or bracket can support the cabinet safely.
The 35mmØ socket has a securing screw at the rear, which should be loosened
before mounting onto the pole and tightened to secure the cabinet when mounted.
The cabinets are also fitted with threaded inserts for suspending from a ceiling or
trussing. These are covered with plastic domed caps, which should be removed to
reveal the threaded insert for fixing hardware to the cabinet, such as eyebolts or
brackets. When flying the cabinets at height, it is necessary to include a secondary
fixing with drop wire for safety.
Each cabinet has rubber feet on the base for free standing or stacked operation.
Ensure that the surface that the cabinet is positioned on is stable and can withstand
the weight of the cabinet.
1
Bluetooth pairing button
2
Mic/Line input 1 level
3
Bluetooth volume
4
Input 1 Mic/Line level switch
5
Input 1 Mic input XLR
6
Input 1 Line input 6.3mm jack
7
Mains IEC inlet + fuse holder
8
Line input 2 level
9
High EQ boost/cut control
10
Low EQ boost/cut control
11
Master output and status LEDs
12
Line output XLR
13
Input 2 Line input RCA sockets
14
Input 2 Line input XLR
15
Power on/off rocker switch
16
Mains voltage selector
